How Driveway Repair Can Improve the Curb Appeal of Your Home

A driveway in bad condition detracts from the curb appeal of a home. Fortunately, many homeowners can make simple repairs to restore their driveway’s beauty and functionality.

Driveway Repair

Small cracks should be repaired before they get larger under the weight of vehicles or become filled with water that freezes and expands. Homeowners can use crack repair filler to fix these areas. Contact Driveway Repair Charleston, SC for professional expertise.

If you have cracks in your driveway, it’s important to have them repaired. A smooth, damage-free driveway adds to your curb appeal, and homebuyers are willing to pay up to 7% more for homes that impress them at first glance. Additionally, cracked and damaged driveways are a safety hazard for drivers and pedestrians alike. If you see a crack in your driveway, it’s crucial to repair it as soon as possible to prevent it from getting worse.

Small cracks that are narrower than 1/4 inch are referred to as hairline cracks. These cracks may not be a sign of major problems, and they can be filled with a concrete patching compound. To apply this type of filler, first mist the surface of the driveway with water. This allows the sealant to bond with the concrete surface. Next, use a cold chisel or hand-drilling hammer to widen the crack slightly so that it will accept the patching material. After this, brush away any loose debris in the crack, and then mix up some asphalt patching blacktop and shovel it into the well-cleaned crack. Smooth the patch with a putty knife, and then wait for it to dry. The patch will take a few days to fully cure, but you should avoid driving on the surface during this time.

Large cracks that are wider than 1/2 inch should be treated with a different kind of repair. A professional can use a hydraulic cement to fill these cracks, and it’s best to hire one to do this job if you have a lot of these larger cracks. These cracks are caused by moisture and temperature changes in the concrete, and they can get even worse if not dealt with.

Wide fissures in your driveway are more serious than hairline cracks and need to be fixed immediately. They could indicate an underlying problem with the subbase or structure of the slab, and this will likely require professional evaluation and specialized repairs. Oftentimes, wide cracks are accompanied by heaving or settling, which means that the entire slab is in need of replacement.


Holes in your driveway can cause damage to cars and make driving dangerous. They also can be a big eyesore. If you have a lot of holes in your driveway it’s probably time to consider some type of resurfacing. Resurfacing is a more extensive project than patching, but it can help to completely rejuvenate your asphalt driveway and make it look like new.

To repair a pothole, start by removing any loose material from inside the hole. You should then be able to see clearly how deep the hole is and what the surface looks like. This will give you a good idea of the materials you’ll need to fill it and make the repairs.

If the surface of your pothole is just a little rough, you can use a bottle of crack filler to smooth it. This will take care of the small surface cracks and can be applied before sealing. Make sure you don’t overfill the cracks though as they may become visible under the sealant.

For a larger pothole you’ll want to use cold patch asphalt repair aggregate. You can purchase this at most home improvement stores or online. Most cold patch can cover a 12” x 12” x 1” hole per 10 lbs of aggregate. This is more than enough to cover a large pothole, but you’ll need to do some math to figure out how much you’ll need for your specific hole.

If you’re repairing something deeper than your asphalt layer, you’ll need to dig down a bit until you reach the subsoil. This can be pretty messy, so you’ll need to wear a dust mask and goggles. You’ll also need to clear out any rocks and other debris from the hole.

After you fill the hole with your aggregate, it’s important to compact the material. This will ensure that the repair holds firmly in place and isn’t easily displaced by passing traffic. This can be done with a tamper or by running over the area with your car.

If the hole is sunken into the ground, you’ll need to regrade the area and add base metal to bring it up to level with the surrounding pavement. This can be a major undertaking and will likely require professional help.

Sunken Sections

As time passes, a driveway is subjected to many environmental factors that can lead to it sinking or becoming uneven. These include soil erosion, ground movement, and heavy vehicle loading, especially from trucks or RVs. Fortunately, there are many ways that these issues can be addressed and corrected before they become significant problems that require costly repair or replacement.

The most obvious option is to replace the sunken concrete with a new section. This is a time-consuming process that requires the digging up of existing concrete and pouring a new slab in its place. It also leaves a noticeable color difference between the new and old concrete for quite some time. If you decide to pursue this method, it’s important that the existing concrete is clean and free of debris that can prevent a successful repair.

Another option is to resurface the entire driveway. This is a much quicker and less expensive solution, but there are some drawbacks to consider. The most significant is that it doesn’t address the underlying cause of the sinking, such as drainage or soil problems. This can lead to the problems returning in the future.

Other options include slurry injection or foam injection. These techniques use a high-density polyurethane material that is injected into the voids under the concrete. The foam expands and lifts the sunken sections back to their original position. It’s a great alternative to the more invasive and expensive methods of replacing your entire driveway or mudjacking.

It’s important to address these issues as soon as possible, before they worsen and cause further damage to your driveway or other concrete surfaces around your home. A professional contractor will be able to recommend the best method of repair for your individual needs. They will be able to inspect your driveway and determine the underlying cause of the damage. From there they can offer a variety of solutions to resolve your damaged concrete and protect it from further damage. They can even help you with some simple maintenance tips that can keep your driveway looking its best for years to come!

Rough Edges

The edges of a driveway need to be well taken care of, as they’re under more pressure than the rest of the pavement. This is why it’s important that you hire a reputable and honest contractor who will take the time to finish your driveway properly, including securing the edges. A sloppy job here could result in cracking and damage down the road.

One of the easiest ways to improve your driveway’s appearance is to install edging along its perimeter. These strips of concrete, clay, metal or plastic help to keep the driveway material in place and can also add a decorative touch. They can either stand up and offer a visual border to your driveway, or they can be buried so they’re flush with the surface of your driveway.

If you choose a concrete or stone option, you’ll need to install a layer of backfill prior to adding the edging. This helps to ensure that your edging is firmly secured, and it also prevents the backfill from washing away during heavy rainfall. Once the backfill is in place, you can set your chosen edging material. When choosing a type of edging, consider factors such as cost, durability and ease of installation.

Once you’ve installed your edging, you’ll need to compact it using a tamper or the back of your shovel. After that, you’ll need to rake and smooth the area to create a clean and professional-looking finished look. You should also treat any wood edging with a preservative to protect it from weathering and pests, which can cause it to degrade faster than other materials.

With proper care and maintenance, your edging will last for years to come. But don’t forget to sweep away any debris and periodically inspect your edging for signs of shifting or damage. If any sections are damaged or showing wear, it may be more cost-effective to replace them with new edging or consider repaving your entire driveway. After all, a cracked or worn-out asphalt surface can be a real eyesore. Plus, if it’s crumbling and uneven, the structural integrity of your driveway is compromised.

Pavement Solutions Can Make Your Parking Lot Look Great and Last Longer

Pavement Solutions provide construction/maintenance services for asphalt and concrete surfaces.

Pavement Solutions

Climate change impacts the performance of asphalt road pavements. It is important to consider pavement materials that are adapted to future weather conditions. These materials may require more structural layers, but they can also have reduced embodied impact.

When it comes to commercial properties, it can be difficult to keep up with all the maintenance needed, especially when it involves large lots or busy areas. It’s important to make a good impression on your customers and give off the image that your property is well-maintained. A nicely paved parking lot is one of the most effective ways to do just that!

It’s important to perform regular inspections of your pavement in order to spot any signs of damage or wear early on. This will help you plan for future repairs and budget accordingly. It’s also a great way to prevent potential safety hazards for your employees and guests.

The sooner you get to any paving problems, the easier and cheaper it will be to fix them. It’s much better to spend a small amount of money fixing your parking lot now than it is to pay for a major repair or replacement in the future.

Cracks in your parking lot may seem minor and harmless, but they’re not something to ignore. When they’re left untreated, they can easily turn into potholes that are unsafe for your guests and employees to drive on. Crack sealing can help prevent moisture from getting into your asphalt and damaging its structure.

Sweeping and cleaning your parking lot on a regular basis is another important aspect of pavement maintenance. It can remove abrasive gravel and debris that could harm your asphalt over time as well as oil or gasoline spills that can cause it to deteriorate faster.

Performing a full-depth reclamation (FDR) on your deteriorating pavement is another effective way to prolong its life and save you the cost of repaving. It involves cutting out a layer of asphalt from the troubled area, then applying adherent and asphalt to fill the hole. It’s more expensive than a traditional resurfacing but still significantly less costly than replacing your entire lot.

It’s important to keep in mind that your paved surfaces are an investment. You want to protect that investment so that it can last for as long as possible. A well-maintained parking lot will not only add to the curb appeal of your business, it will make a positive first impression on your customers.


Pavement Solutions provides construction, maintenance and repair services for residential and commercial asphalt and concrete pavement. We specialize in providing value-based recommendations to maximize the appearance and life of pavement systems. We also offer striping and ADA compliant markings/signage and can provide comprehensive drainage reconfiguration services.

Routine inspections facilitate early issue detection and allow for cost-effective repairs, preserving pavement integrity and eliminating the need for costly replacement. Seal coating protects the surface from UV rays, water and chemicals, enhancing the appearance and guarding against premature deterioration.

Small cracks and potholes that aren’t repaired immediately will only get bigger over time, leading to a host of expensive problems. Fortunately, these issues are easy to fix and can be prevented by carrying out timely repairs.

When left untreated, asphalt surfaces deteriorate rapidly due to weather conditions and traffic use. Excessive salt treatments and freezing temperatures damage the surface, while heavy traffic and frequent vehicle turning forces and stops can cause the base material to break down. Combined with poor maintenance, these factors can result in widespread surface failure and extensive, costly repairs.

Asphalt repair specialists can provide several different methods to restore damaged roadways and parking lots, including cold-mix patching, throw and go and throw and roll. Cold-mix repairs are inexpensive and fast, but they don’t last long. Throw and go and throw and roll are more attractive but they’re still only temporary fixes.

Besides being unsightly, potholes and cracked pavement reduce the movement of vehicles. This causes traffic congestion and wastes precious gasoline. In the worst cases, bad roads and parking lots can cause accidents resulting in serious injuries or even death.

Poorly constructed or maintained drainage systems can also cause pavement failure. If the slope of a pavement is too steep, it can wash out the base material underneath. A professional from Pavement Solutions can inspect a parking lot and configure the optimal surface elevation to ensure proper drainage.

Proper drainage prevents excess run-off and soil erosion, reducing environmental impacts. It also helps minimize the need for water filtration and reduces the amount of contaminants entering groundwater supplies. Additionally, recycled asphalt reduces the need for raw materials and fuel to be produced and transported, cutting down on pollution and greenhouse gas emissions.

Seal Coating

Seal coating is a crucial part of asphalt maintenance, and it’s also an effective way to repair damaged areas in your parking lot or road. Sealcoating helps your pavement look great and last longer, which can help save you money in the long run.

Asphalt is susceptible to a variety of damaging factors, such as water, oxidation, and motor oil. Sealcoating creates a protective barrier that blocks out these harmful elements and slows down the oxidation process. By doing this, your asphalt will remain flexible and pliable for a longer period of time, which can significantly extend its lifespan.

Prior to seal coating, the surface of your asphalt needs to be thoroughly cleaned. Dirt and sand should be blown off the surface using blowers and rotary brooms. Then, any existing cracks in the surface should be filled in with a hot rubberized crack filling compound. Finally, any oil or gas stains should be treated with an asphalt stain remover.

Once your asphalt is ready, the workers will begin applying the seal coat. First, they’ll spray a thick layer across the entire surface, including the edges. Then, the workers will squeegee or brush the product around to make sure that it gets into all the cracks and crevices in your pavement.

The best time to seal your asphalt is in the spring, as this season provides ideal conditions for the curing process. The temperatures need to be at least 50 degrees, and it’s essential that no rain falls during or after the application of the sealant. Otherwise, the water would wash away the coating and prevent it from fully curing.

After the workers apply the coat, they’ll need to let it dry for 24 hours. During this time, the area should be completely closed off to pedestrian and vehicular traffic. Workers will use cones, barricades, and possibly caution tape to keep people out of the work zone. In addition, all vehicles should be removed from the area, and any sprinklers should be turned off to ensure that the new coating doesn’t get wet.

As the seal coat dries, it will strengthen the asphalt. It will also block out the elements that cause oxidation and make your asphalt more durable and attractive.


Line striping is a vital part of any business parking lot or roadway. It provides visibility for drivers and pedestrians and clearly defines lane locations, direction of traffic flow, and stop locations. Without pavement markings, confusion and accidents can occur. A well-planned striping job can maximize the capacity of your parking lot by creating clearly defined spaces that make it easier for vehicles to park in a straight path and avoid traffic jams and frustrated customers.

Pavement markings also help with ADA compliance. Properly designed and executed parking lot striping allows for the correct number of handicapped spots based on the size of your lot. These ADA guidelines ensure that your customers with disabilities have the accessibility they need and that your property is in compliance with federal law.

Whether your parking lot is new or in need of a refresh, it is important to clean the surface thoroughly before painting and to use high-quality paint that is specifically formulated for asphalt pavement. Standard house paints tend to peel off over time, but a professional pavement company will know which paints are best for this type of work and which will adhere to the asphalt’s surface. It is also a good idea to restripe your lot on a sunny day so the paint dries quickly after application.

Parking lot striping not only helps direct traffic for both cars and pedestrians, but it also enhances the aesthetic of your property. A well-maintained parking lot with crisp, brightly colored lines gives your customers a positive first impression and demonstrates that you care about the safety of your employees, customers, and visitors.

As with sealcoating, regular maintenance of your parking lot will increase its lifespan and improve the overall appearance of your business. Regular pavement sealing, along with routine parking lot striping and repair services will keep your asphalt looking new for years to come and reduce the need for expensive repairs.